Our verdict: the bulb you replace determines the value
How we reviewed it: this is an editorial assessment of published specifications and the linked product listing, checked September 27, 2026. We have not purchased or tested this product. Examples are calculations, not measured performance. We do not assign a test score or reproduce customer ratings.
This review covers the Philips frosted A19, 2700 K, E26, non-dimmable four-pack linked below. Other Philips packages may have different input, brightness, dimming or voltage requirements. Match the complete listing rather than buying on the brand name alone.
The most promising energy case is replacing a frequently used incandescent while keeping suitable brightness. If your current bulb is already a working LED, compare actual input and useful light before replacing it. Buying a new package merely because it says “energy efficient” may add cost with very little reduction in use.
The label figures that affect the decision
| Decision point | What it means for you |
|---|---|
| 800 lumens | The advertised light output. Compare brightness separately from watts. |
| 8.8 W input / 60 W equivalent | Use 8.8 W in electricity calculations. The equivalent figure describes its replacement class. |
| 2700 K soft white | A warm-white color specification; preference depends on the room and other lights. |
| A19 shape and E26 base | Check both physical fit and the fixture’s electrical requirements. |
| Non-dimmable, indoor | Choose a different suitable product if the fixture uses a dimmer or requires outdoor approval. |
The retailer’s short attribute list also displays “60 watts”; its full title distinguishes 8.8 W input from 60 W equivalence. Verify the package label when it arrives. We have not measured output, flicker, color quality or lifetime, so the listing’s comfort claims are not independent findings here.
What the electricity calculation actually shows
Here is an illustrative comparison using three hours per day, 365 days and $0.18/kWh. It uses the listed 8.8 W as an input assumption, not a measurement of this bulb. Electricity-only cost is watts ÷ 1,000 × hours × rate.
One 8.8 W bulb: 0.0088 × 3 × 365 = 9.636 kWh, costing about $1.73 per year. A 60 W incandescent under the same schedule uses 65.7 kWh and costs about $11.83. The modeled difference is about $10.09 per year per bulb.
Now compare a working 9 W LED: the difference is only 0.2 W, or 0.219 kWh and about $0.04 per year at the same schedule and tariff. Four identical replacements multiply those figures by four. Different schedules or tariffs change the result.
This comparison excludes purchase cost and does not establish equal measured brightness, reliability or lifetime. Read LED lighting running costs for the general method, then use your own operating hours.
Check the fixture before counting savings
- Confirm the voltage on the selected product label; an E26 screw base alone does not prove electrical compatibility.
- Do not use this non-dimmable version with a dimming setup unless the manufacturer explicitly permits it.
- Check the fixture’s permitted lamp type, dimensions and maximum rating.
- Confirm suitability for an enclosed fixture if yours has a closed cover; do not infer that from “indoor.”
- Switch off power and follow the fixture and lamp instructions when replacing a bulb.
A package of four is only useful if you have enough suitable fixtures or a sensible need for spares. Check whether you prefer the warm color in one location before replacing several rooms at once.
When we would consider it—and when we would wait
Consider it for a compatible frequently used fixture that still has an incandescent and needs warm, fixed-output light. Wait or choose another suitable model for a dimmer, an unconfirmed enclosed fixture or a different light-color preference.
For the energy-only payback, divide your actual replacement cost by the modeled annual saving. If an old bulb must already be replaced, compare the extra purchase cost of the alternatives rather than treating the entire new bulb price as an efficiency premium. We do not publish a fixed Amazon price because seller, pack and availability can change.
A functioning LED does not need replacing just to match a new label. Its remaining life, acceptable brightness and your actual usage belong in the decision too.
Choose your next step
Continue with the question that matches your next decision:
Shopping options for this guide
We may earn a commission if you buy through the links in this section. As an Amazon Associate I earn from qualifying purchases. How we fund this site.
Philips A19 soft white non-dimmable LED bulbs (4-pack)
Replacing an incandescent bulb? This listing specifies 800 lumens, 2700 K soft white light and 8.8 W per bulb, with an E26 base. Use the actual 8.8 W input in your cost comparison; the advertised 60 W equivalent describes the replacement brightness, not electricity consumption.
Before buying: This version is non-dimmable and intended for indoor use. Confirm rated voltage, socket, fixture size and enclosed-fixture suitability on the product label before installation. The article's 9 W example is illustrative and is not a test of this bulb; replacing an existing LED may offer little additional saving.
View Philips A19 soft white non-dimmable LED bulbs (4-pack) at Amazon.com (opens in a new tab)These are shopping options, not hands-on test results. Check the retailer for current specifications, price and availability.
Sources & further reading
Numerical examples are illustrative unless explicitly described as measured. This guide does not claim hands-on product testing. Read the methodology and editorial disclosure.